BNV range of protectors is designed to protect analogue or digitals signals with built-in disconnection system for signal loop verification. This range is recommended for protection of sensors, communications, PLC...

This range has been designed to protect equipments connected by means of RS-232 in 7 and 23-wire configurations in low-hostility installations in which espected overvoltages are low-level. Its aerial format allows it to be...

Protectors of the DIN 24V-G range are specially designed to optimise space, and are capable to protect 2 and 4 signal wire pairs in a 7,75 mm wide module. This range is recommended for protection of sensors,...

This series provides solutions to protect 1-par telephone systems on DIN rail. They are specially recommended for protecting equipment connected to the telephone line in industries. CPT...

This range of protectors has been designed for protection of signal pairs, protecting each conductor to ground, and between both conductors giving a common and differential modes of protection. Recommended for communications...

Easy installation for isolated equipments, with connectionby means of RJ connector, which allow them to be installed in series with the connection cable itself. A side terminal is provied for the earth termination...

TL4-RK range of surge protective devices has been desgined for protection against transient overvoltages in data and telephone lines (PSTN, ADSL, PP and ISDN). TL4 The TL4 series consists of 19š rack chassis...