Loading... Please wait...

Our Newsletter


Sort by:

Measurement & Control

  • BNV - Terminal connector based protectors
    BNV - Terminal connector based protectors
    BNV range of protectors is designed to protect analogue or digitals signals with built-in disconnection system for signal loop verification. This range is recommended for protection of sensors, communications, PLC...

  • DB HS - SUB-D connector based protectors
    DB HS - SUB-D connector based protectors
    This range has been designed to protect equipments connected by means of RS-232 in 7 and 23-wire configurations in low-hostility installations in which espected overvoltages are low-level. Its aerial format allows it to be...

  • DB VHS - SUB-D connector based protectors
    DB VHS - SUB-D connector based protectors
    This range enables to protect equipment connected by V24 and V35 interfaces with Sub-D connectors. Designed in aerial format, they can be directly connected to the equipment to be protected. Discharge to ground is made...

  • DIN 24V-G - DIN rail protectors
    DIN 24V-G - DIN rail protectors
    Protectors of the DIN 24V-G range are specially designed to optimise space, and are capable to protect 2 and 4 signal wire pairs in a 7,75 mm wide module. This range is recommended for protection of sensors,...

  • DIN 485 - DIN rail protectors
    DIN 485 - DIN rail protectors
    RS-485 communications networks are widely used in industrial installations due to their lengths may achieve up to 1000 m, which makes them highly vulnerable to inductions. This range of products protect networks balanced in...

  • DIN V - DIN rail protectors
    DIN V - DIN rail protectors
    This range has been designed to protect analogue signals of 12V or 24V (for instance 232 protocol), according to the model. This range is recommended for the protection of sensors, communications, input/output modules of a...

  • DIN V-2C - DIN rail protectors
    DIN V-2C - DIN rail protectors
    This range of protectors has been designed for protection of signal pairs, protecting each conductor to ground, and between both conductors giving a common and differential modes of protection. Recommended for communications...